Renesas RYZ014 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 77

Renesas RYZ014 Скачать руководство пользователя страница 9

RYZ014 Modules

Use Cases with AT Commands

R19AN0075EU0150 Rev.1.50

Page 9 of 76

Mar.15.22

2.1.3 Error Handling

•

The SIM card is read only when the modem is in

CFUN=1

(fully functional) or CFUN=4 (airplane mode)

states. Trying to access the SIM card with AT commands in

CFUN=0

state will result in ERROR.

•

SIM card is not present or not detected. In this case, verify that the right form SIM card is inserted
properly to the SIM slot, and check again.

Command

Response

Comment

Enable return final result code

AT+CMEE=2

OK

CME ERROR: <err> result code and
use verbose <err> values

Check SIM card state

AT+CPIN?

+CME ERROR: SIM not inserted

SIM card is not present or not detected

The

+CSUS

command requires that the UE is in

CFUN=0

state. If you get an error while using the

+CSUS

command, first check how many SIM slots are supported by the module, and second confirm the

CFUN=0

state.

Command

Response

Comment

Check the number of supported SIM slots (case only 1 slot)

AT+CSUS=?

+CSUS: 1

OK

Only one SIM slot is supported (external)

Trying to switch to the internal SIM slot results in error

AT+CSUS=1

+CME ERROR: ERROR

If the CFUN state is 1 or 4, the SIM slot cannot be switched

AT+CFUN?

+CFUN: 4

OK

AT+CSUS=1

+CME ERROR: ERROR

Change CFUN state to 0

AT+CFUN=0

OK

Check the number of supported SIM slots (case 2 slots)

AT+CSUS=?

+CSUS: 2

OK

External is #0, internal is #1.

Trying to switch to the internal SIM slot succeeds

AT+CSUS=1

OK

2.2 Configure the Operator Mode

2.2.1 Feature Description

RYZ014 modules can support up to 17 LTE bands. Scanning all the bands takes several minutes.
Specifically, cell detection duration per candidate EARFCN is 30ms/18mJ (1.3 µAh). Scanning the full 17
bands will take 186 seconds and consume 115J (8.4 mAh).

«
...
7
8
9
10
11
...
»

Содержание RYZ014














































































Отзывы:

Нет отзывов