Renesas Solution Starter Kit for RX23W
2. Power Supply
R20UT4446EG0102 Rev. 1.02
Page 11 of 41
Jun 22, 20
2. Power Supply
2.1
Requirements
This RSSK is supplied with an E1 debugger or E2 Lite debugger. The debugger is able to power the RSSK
board with up to 200mA. When the RSSK is connected to another system, that system can supply power to
the RSSK. This board has an optional centre-positive supply connector using a 2.0mm barrel power jack.
This CPU board supports one external voltage input. Details of the external power supply connection are
shown in
and
below. The default power configuration is shown in
bold, blue text.
Table 2-1: PWR connector Requirements
Connector
Supply voltage
PWR
Input 5VDC
Table 2-2: Main Power Supply Requirements
Supply
Source
*1
J3
Setting
J13
Setting
J10
Setting
J5
Setting
J4
Setting R37 R44 R35 Board_5V
Board_VCC
*2
UC_VCC
E2 Lite /
E1(3.3V)
Open
Open
Short
1-2
Short
1-2
Short
Fit
DNF DNF N/A
*3, 4, 5, 6
3.3V
PWR
connector
Open
Short
Short
2-3
Short
don’t
care
Fit
DNF DNF
5V
*4, 5
3.3V
Open
Short
Short
1-2
Short
1-2
Short
Fit
DNF DNF
5V
*3, 4
3.3V
Open
Short
Short
don’t
care
don’t
care
DNF Fit
DNF
5V
*3, 4, 5
1.8V
*7
USB0_2
2-3
Short
Short
Short
1-2
Short
2-3
Short
Fit
DNF DNF
5V
*3, 5
3.3V
USBCN0
1-2
Short
Short
Short
1-2
Short
1-2
Short
Fit
DNF DNF
5V
*3, 4
3.3V
*1
: 5V can’t be supplied with the E1 emulator.
*2
: 5V Pmod™ interface in all setting can’t be used.
*3
: USB host interface can’t be used.
*4
: USB function (bus-power) can not be used.
*5
: USB function (self-power) can not be used.
*6
: USB CAN and EEPROM 5V interface can’t be used.
*7
: User LED can’t be used.
The compatible plug of the AC adapter is center plus, outer diameter 5.5 mm, inner diameter 2.1 mm.
The main power supply connected to PWR should supply a minimum of 5W to ensure full functionality.
When using USB in function mode, be sure to set J5 to 1-2 Short. Also, do not plug in both USB0_1 and USB0_2
cables at the same time.
Содержание RX200 Series
Страница 41: ...R20UT4446EG0102 RX23W Group ...