background image

Corporate Headquarters

TOYOSU FORESIA, 3-2-24 Toyosu,

Koto-ku, Tokyo 135-0061, Japan

www.renesas.com

Contact Information

For further information on a product, technology, the most 

up-to-date version of a document, or your nearest sales 

office, please visit:

www.renesas.com/contact/

Trademarks

Renesas and the Renesas logo are trademarks of Renesas 

Electronics Corporation. All trademarks and registered 

trademarks are the property  of their respective owners.

IMPORTANT NOTICE AND DISCLAIMER

RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL 

SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING 

REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND 

OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 

PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible 

for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) 

ensuring your application meets applicable standards, and any other safety, security, or other requirements. These 

resources are subject to change without notice. Renesas grants you permission to use these resources only for 

development of an application that uses Renesas products. Other reproduction or use of these resources is strictly 

prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. 

Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, 

damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject 

to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources 

expands or otherwise alters any applicable warranties or warranty disclaimers for these products. 

(Rev.1.0  Mar 2020)

© 202

1

 Renesas Electronics Corporation. All rights reserved.

Содержание RTD120D-EVK



















Отзывы: