background image

Notice 

1. 

Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of 
semiconductor products and application examples.  You are fully responsible for the incorporation of these circuits, software, 
and information in the design of your equipment.  Renesas Electronics assumes no responsibility for any losses incurred by you 
or third parties arising from the use of these circuits, software, or information. 

2. 

Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics 
does not warrant that such information is error free.  Renesas Electronics assumes no liability whatsoever for any damages 
incurred by you resulting from errors in or omissions from the information included herein. 

3. 

Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of 
third parties by or arising from the use of Renesas Electronics products or technical information described in this document.  No 
license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of 
Renesas Electronics or others. 

4. 

You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.  
Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, 
modification, copy or otherwise misappropriation of Renesas Electronics product. 

5. 

Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”.  The 
recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below.   

“Standard”: 

Computers; office equipment; communications equipment; test and measurement equipment; audio and visual 
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. 

“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-

crime systems; and safety equipment etc. 

Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to 
human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property 
damages (nuclear reactor control systems, military equipment etc.).  You must check the quality grade of each Renesas 
Electronics product before using it in a particular application.  You may not use any Renesas Electronics product for any 
application for which it is not intended.  Renesas Electronics shall not be in any way liable for any damages or losses incurred 
by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas 
Electronics. 

6. 

You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, 
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation 
characteristics, installation and other product characteristics.  Renesas Electronics shall have no liability for malfunctions or 
damages arising out of the use of Renesas Electronics products beyond such specified ranges. 

7. 

Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have 
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions.  Further, 
Renesas Electronics products are not subject to radiation resistance design.  Please be sure to implement safety measures to 
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas 
Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and 
malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures.  Because the evaluation 
of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by 
you. 

8. 

Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility 
of each Renesas Electronics product.  Please use Renesas Electronics products in compliance with all applicable laws and 
regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive.  
Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws 
and regulations. 

9. 

Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose 
manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations.  You should not use 
Renesas Electronics products or technology described in this document for any purpose relating to military applications or use 
by the military, including but not limited to the development of weapons of mass destruction.  When exporting the Renesas 
Electronics products or technology described in this document, you should comply with the applicable export control laws and 
regulations and follow the procedures required by such laws and regulations. 

10.  It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise 

places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this 
document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of 
unauthorized use of Renesas Electronics products. 

11.  This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas 

Electronics. 

12.  Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document 

or Renesas Electronics products, or if you have any other inquiries. 

(Note 1)  “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-

owned subsidiaries. 

(Note 2)  “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. 

(2012.4) 

Содержание RL78/G1D































Отзывы: