Renesas RH850/F1KH-D8 233pin, Руководство пользователя

Страница: 8 / 26

F1KM-S4, F1KH-D8 272pin PiggyBack board Y-RH850-F1X-272PIN-PB-T2-V1
R20UT4009ED0100 Rev.1.0 8
2017-07-12
Figure 3
– Jumper setting overview

The green jumper JP12 for FLMD
O0 always must be closed for a ‘normal’
(user mode and debug) operation of the device.

The red jumpers
must be set for a “Voltage 1” (typ. +5.0V) operation of
the related device supply.

The blue jumper
must be set for a “Voltage 2” (typ. +3.3V) operation of
the related device supply.
Note:

The RH850/F1KH-D8 device requires a supply voltage of 3.3V on its
REG1VCC pin.

The RH850/F1KM-S4 device requires the same supply voltage to be set
to REG0VCC and REG1VCC .
See the section ‘Electrical Characteristics’ in the device User’s Manual for further
details.
For jumper settings related to the device operation mode, refer to the
chapter 6.2.