Renesas Renasas Single-Chip Microcomputer SH7086, Руководство пользователя

Страница: 23 / 70

Functional Overview
2.3 Memory
Rev.1.0 Feb 06. 2007 2-5
REJ10J0916-0100
2
Table2.3.2 lists an example of bus state controller settings for operation with the SH7086 Bus clock at 40MHz.
Table2.3.2 Example of Bus State Controller Settings at SDRAM
User Area SDRAM Controller Settings
CS3 CS3 Space Bus Control Register(CS3BCR)
Initial value :H'36DB 0600
Recommended set value : H'1000 4400
- Specify idle cycles between write-read cycles and write-write cycles
IWW[2:0] = 001 ; 1 idle cycle inserted
- Specify memory type : TYPE[2:0] = 100 ;SDRAM
- Data bus size : BSZ[1:0] = B'10 ;16-bit size
CS3 Space Wait Control Register(CS3WCR)
Initial value : H'0000 0500
Recommended set value :H'0000 4891
- Number of Auto-Precharge Completion Wait Cycles
TRP[1:0] = 10 ;3 cycles
- Wait Cycles between ACTV Command and READ(A)/WRIT(A) Command
TRCD[1:0] = 10 ;3 cycles
- Area 3 CAS latency
A3CL[1:0] = 01 ;2 cycles
- WRIT(A) command
→
Number of Auto-Precharge/PRE Command cycles
TRWL[1:0] = 10 ;2 cycles
- REF Command/Self-Refresh Release
→
Number of ACTV/REF/MRS Command cycles.
TRC[1:0] = 01 ; 4 cycles
SDRAM Control Register(SDCR)
Initial value : H'0000 0000
Recommended set value : H'0000 0809
- Refresh control
RFSH = 1 ; Refresh enabled
- Refresh control
RMODE = 0 ; Auto refresh
- Bank active mode
BACTV = 0 ;Auto precharge mode
- Number of area3 row address bits
A3ROW[1:0] = 01 ;12 bits
- Number of area3 column address bits
A3COL[1:0] = 01 ;9 bits
Refresh Timer Control/Status Register(RTCSR)
Initial value : H'0000 0000
Recommended set value : H’A55A 0010
- Clock select
CKS[2:0] = 010 ;B
φ
/16
- Refresh times
RRC[2:0] = 000 ; 1 time
Refresh Time Constant Register(RTCOR)
Initial value : H'0000 0000
Recommended set value : H'A55A 0027
*The following shows refresh request intervals in cases when clock select is set to B
φ
/16.
1 cycle :400nsec(40MHz/16 = 2.5MHz)
Refresh request intervals for the SDRAM : every 15.625
μ
sec
15.625
μ
sec /400nsec = 39(0x27) cycles / refresh