RSSHEUM0003 - 0101
Rev.1.00
Page 25
Renesas System Solution (Beijing) Co., Ltd, Shanghai Branch
Unit 207 AZIA Center, No.1233 Lujiazui Ring Road, Pudong District, Shanghai, China
1, Preset time setting
2, Running status display
2.2.3 Platform running status display menu
This is the fourth level menu of the LCD display structure, and there is only 1 page that displays the
washing program running status and user program setting. In this level menu, only “ Start / Stop ”
key and “ + ” key are valid. By pressing “ + ” key, user can browse the selected program parameters;
by pressing “ Start / Stop ” key, the program will paused and allows user to set again the washing
program in stop status. The display content is as below by pressing “ + ” key in 4
th
level (cycle over):
“ Program left time ”
“ Soak time ”
“ Wash time ”
“ Rinse time ”
“ Spin time ”
“ Function selected ”
…
2.2.4 Function setting menu introduction
This is the menu page for user to set the special function during the washing program running. The
default setting is “ No function selected ”, by pressing “ + ” or “ - ” key user can shift up and down
the available functions from “ No function selected ” to “ All function selected ”. Below figure
shows the function selection setting rule.
No function
Save water
Tube dry
Save water & Tube dry
Tel: (86-21) 6888-0556 Fax: (86-21) 6888-0559 Zip: 200120
