RSSHEUM0003 - 0101
Rev.1.00
Page 18
Renesas System Solution (Beijing) Co., Ltd, Shanghai Branch
Unit 207 AZIA Center, No.1233 Lujiazui Ring Road, Pudong District, Shanghai, China
2. User interface
2.1 Platform key introduction
This part will introduce platform key pressing rule and the LCD display function based on key and
platform running status.
After “ Power ” key pressed, the platform is in initial mode, all key are valid, and during preset
running, only “ + ” and “ Start / Stop ” key are valid. Below table shows the valid and invalid key in
relative program running mode:
Status
Key
Stand By
Initial
Run
Stop
Preset
Demo/ Debug
Run
“ Power ”
○
○
○
○
○
○
“ Program ”
×
○
×
○
× ×
“ Function ”
×
○
×
○
× ×
“ Water Level ”
×
○
×
○
× ×
“ Start / Stop ”
×
○
○
○
○
○
“ + ”
×
○
○
○
○
○
“ - ”
×
○
×
○
× ×
“ Cancel ”
×
○
×
○
× ×
“ OK ”
×
○
×
○
× ×
2.1.1 “ Power ” key introduction
When “ Power ” key pressed, the platform will run in “ Initial ” mode, all keys are valid for setting
the platform.
The platform will turn to “ Stand By ” mode if “ Start / Stop ” key have not been pressed
within 5 minutes since any key pressed (or no key pressed) in this mode.
When the program runs to the end, the platform will run to “ Stand By ” mode.
Tel: (86-21) 6888-0556 Fax: (86-21) 6888-0559 Zip: 200120
