Renesas R0K5R8C34DK2HBR, Руководство по эксплуатации оборудования

Страница: 14 / 32

R8C/34K Group USB Host Evaluation Board R0K5R8C34DK2HBR
Hardware Instruction Manual
R01AN0649EJ0110 Rev.1.10 Page 14 of 26
Jul 21, 2011
6.3 Connecting the E8a Emulator
The on-chip debugger function of the R8C/34K Group MCU can be used by connecting the board to the E8a emulator
manufactured by Renesas Electronics Corp. As shown in Figure 8, a 14-pin connector (CN6) is located on the back of
the board for connecting the E8a emulator. When using E8a, leave JP6 in the open status
(the default status at shipping)
as shown in
Figure 11
. For more details on how to use the emulator, refer to the E8a application note.
Figure 8 Connector for E8a Emulator (CN6)
When you select “stabilized power supply (DC)” as the main power supply (JP1) for the
evaluation board, “
Remove ” the check from the box next to “Supply power from emulator”
as shown in
Figure 9
.
Figure 9 E8a Power Supply Check Box