Renesas QB-78K0MINI, Руководство пользователя

Страница: 12 / 54

CHAPTER 1 GENERAL
User’s Manual U17029EJ3V0UM
10
Notes 1. The minimum operating frequency and minimum operating voltage for rewriting the flash memory are
determined for each device. When using the 78K0/Kx1+, for example, at least a clock of 2 MHz and an
operating voltage of 2.7 V must be supplied.
2. The Port A and Port B pins vary according to the target device. When the target device is the 78K0/KF1+,
these pins are P31 and P32.
Table 1-3. List of Debug Functions
Item Specification
On-chip ROM/flash security functions 10 byte ID code authentication
Event-triggered break functions One break before execution (zero if using a software break)
One access break
Software break functions 2000 points
Forced break functions Included
Execution functions Continuous execution (free running), execution from cursor position, restart, and step
execution
Slow motion Included
Pseudo real-time RAM monitor
functions RAM area: 16 bytes (breaks can be set at up to 8 locations in 1-bit units, enabled by a
temporary break)
DMM functions Included (implemented as temporary break.)
Register manipulation functions Included
Mask functions Reset
SP setting overlook protection
function Yes
Execution time measurement Not included
Trace functions Not included