Renesas QB-78K0FX2L, Руководство пользователя

Страница: 8 / 37

QB-78K0FX2L In-Circuit Emulator CHAPTER 1 GENERAL
R20UT2057EJ0100 Rev.1.00 Page 8 of 37
2012.05.18
1.1 Hardware Specifications
Table 1-1. QB-78K0FX2L Hardware Specifications
Parameter Specification
Target device
78K0/FY2-L, 78K0/FA2-L, 78K0/FB2-L
Operating voltage 1.8 to 5.5V
High-speed system clock
Note1
2.7 V

V
DD

5.5 V :1 to 10 MHz
Note2
Internal high-speed
oscillation clock
Note1
2.7 V

V
DD

5.5V :1, 2, 4, 8 MHz
Note2
Operating
frequency
Internal low-speed
oscillation clock
1.8 V

V
DD

5.5V :31.25kHz
Note3
Operating temperature range 0 to 40°C (No condensation)
Storage temperature range
−
15 to 60°C (No condensation)
External dimensions See figure below
Power
consumption
Target system power supply
Voltage: 1.8 to 5.5 V
Current: about 3mA MAX
Weight Approx. 300 g
Host interface USB interface (1.1, 2.0)
Note1 Error of the clock generated in the emulator is ±0.5%. However, this does not apply to error of
the oscillator or clock system on the target board.
Note2 You can use only when the PLL is 4MHz.
Note3 The actual device characteristics will be from 27 to 33kHz.