Renesas Bluetooth Low Energy Modules RYZ012A1 Pmod™ Expansion Board – Quick Start Guide
R21QS0002EG0101 Rev.1.01
Page 3 of 4
May.25.22
5. Regulatory Information
This section contains general regulatory information. For a full list of requirements and integration guidelines
please refer to the RYZ012A1 User’s Manual.
5.1 FCC Statement
FCC-ID: COR-RYZ012A1
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in an industrial or residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
transmitter must be co-located or operating in conjunction with any other antenna and transmitter.
5.2 EU Declaration of Conformity
This device complies with the essential requirements and other relevant provisions of Directive
2014/53/EU. A copy of the Declaration of Conformity is available on request.
Warning
– This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be requried to take adequate measures to correct this interference.
5.3 UKCA Declaration of Conformity
This device is in conformity with the following relevant UK Statutory Instrument(s) (and their
amendments); No.1206 Radio Equipment Regulations 2017. A copy of the Declaration of
Conformity is available on request.
Warning
– This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures to correct this interference.
5.4 Japanese Radio Law
This device is granted pursuant to the Japanese Radio Law (
電波法
).
This device should not be modified (otherwise the granted designation number
will become invalid)
The host product should provide the statement below on its housing:
当該機器には電波法に基づく、技術基準適合証明等を受けた特定無線設備を装着している
(Translation: “This equipment contains specified radio equipment that has been
certified to the Technical Regulation Conformity Certification under the Radio Law.”)
