(4/4)
7. Precautions
IMPORTANT
Notes on This Product:
z
We cannot accept any request for repair.
z
When using the oscillator circuit on the M38C59T-RLFS, check the output waveform of pins X
OUT
and X
COUT
by an
oscilloscope.
z
When mounting an oscillator circuit on the M38C59T-RLFS, make sure that 2 mm or more of a DIP pin does not
appear on the rear face (solder side). It may be short-circuited with the DIP pin of the converter board.
z
For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage
http://www.renesas.com/en/tools
8. External Dimensions
Figure 5 External dimensions
9. Connecting to the Target System
Figure 6 Connecting to the target system
64.0
45
.0
5.
4
9.
2
12
.5
CN
2
VCC
GND
RESET
+
R1
C6
C5
R5
R6
M3T-80LCC-DMS
(Optional)
M3T-FLX100-R
(Optional)
M3T-FLX100-T
(Optional)
M3T-FLX-80NRA
80-pin QFP
(Optional)
LCC socket
(Optional)
M3T-F160-80LCC
80-pin LCC
(0.8-mm-pitch)
M3T-FLX-80NSD
80-pin LQFP
(Optional)
M3T-80LCC-DMS
(Optional)
M3T-F160-80LCC
80-pin LCC
(0.8-mm-pitch)
M3T-FLX100-R
(Optional)
M3T-FLX100-T
(Optional)
M38C59T-RLFS
80-pin 0.5-mm-pitch
80-pin 0.8-mm-pitch
Unit: mm