APPENDICES
APPENDICES-24
M32R-FPU Software Manual (Rev.1.01)
(1) Overflow occurs in Step 1
<When EO = 0, EX = 0: OVF and IXCT occur>
Type of R0
Condition
FMUL + FADD Operation
FMADD Operation
Normalized
–
R0 = OVF immediate
R0 = OVF immediate
number, 0
value (Note 1) + R0
value (Note 2)
Infinity
when OVF immediate value
EV=0
IVLD occurs
same as left
R0=H'7FFF FFFF
is R0 and the opposite sign
EV=1
IVLD occurs, EIT occurs
same as left
of the infinity sign
R0 = maintained
factors other than above
–
R0 =
∞
same as left
(same as original value)
Denormalized
DN=0
UIPL occurs, EIT occurs
same as left
number
R0 = maintained
DN=1
R0 = OVF immediate value
same as left
(Note 1)
QNaN
–
R0 = maintained (QNaN)
same as left
SNaN
EV=0
IVLD occurs
same as left
R0 = R0 converted to QNaN
EV=0
IVLD occurs, EIT occurs
same as left
R0 = maintained (SNaN)
Note 1: Refer to [Appendix Table 5.3.1 Operation Result due to OVF Exception] for immediate
values if an overflow occurs due to Overflow Exclusion when the EIT processing is
masked.
Note 2: In Step 1, the rounding mode is set to [Round toward 0]. However, when an overflow
occurs, the immediate value is rounded according to the rounding mode. Refer to
[Appendix Table 5.3.1 Operation Result due to OVF Exception] for these values.
However, when the rounding mode is [round toward nearest], the OVF immediate value =
infinity and the R0 value becomes the same as that of FMUL + FADD.
<When EO = 1: OVF occurs>
Type of R0
Condition
FMUL + FADD Operation
FMADD Operation
Normalized
–
EIT occurs when FMUL is
EIT occurs,
number, 0,
completed
R0 = maintained
Infinity
R0 = maintained
Denormalized
DN=0
Same as above
UIPL occurs,
number
EIT occurs
R0 = maintained
DN=1
Same as above
EIT occurs
R0 = maintained
QNaN
–
Same as above
Same as above
SNaN
EV=0
Same as above
IVLD occurs,
EIT occurs
R0 = maintained
EV=1
Same as above
Same as above
APPENDIX 6
Appendix 6 M32R-FPU Specification Supplemental Explanation
Содержание M32R-FPU
