( 3 / 4 )
5. Connection Procedure
(See Figure 3)
The procedure for connecting the M3062PT-80FPB is shown
below.
(1) Mount the NQPACK080SB on the target system.
(2) Attach the YQPACK080SB on the NQPACK080SB.
(3) Secure the four corners of the YQPACK080SB with the
YQ-GUIDE's.
• Do NOT use the screws included with the
YQPACK080SB.
• Do NOT use the screwdriver included with the
NQPACK080SB that is used only for the
HQPACK080SB. It is not for the YQ-GUIDE's.
(4) Attach the probe of the emulation pod to the M3062PT-
80FPB.
(5) Attach the M3062PT-80FPB on the YQPACK080SB.
Figure 3 Connection procedure
6. External Dimensions and a Sample Foot Pattern
Figure 4 External dimensions and a sample foot pattern
Unit: mm
M3062PT-80FPB
YQ-GUIDE's (x4)
YQPACK080SB
NQPACK080SB
80-pin 0.65-mm-pitch
(80P6S-A) foot pattern
M3062PT3-RPD-E
M3062NT3-RPD-E
M3062PT-EPB
Use a slotted screwdriver.
: Position of No. 1 pin
Be sure to align the pins.
