background image

( 3 / 36 )

Preface

The M30220T-PRB is a pod probe for M30220 and M30221 Groups of Renesas 16-bit microcom-
puters. The M30220T-PRB is used by connecting to the PC4701 emulator main unit and the
M30200T-RPD-E emulation pod main unit.

This manual mainly explains specifications and setting up of M30220T-PRB. For detail information
about the emulator main unit, emulation pod main unit, and emulator debugger, refer to each user's
manual.

Emulator main unit

: PC4701M, PC4701HS, PC4701L User's Manual

Emulation pod main unit

: M30200T-RPD-E User's Manual

Emulator debugger

: M3T-PD30 User's Manual

To check the components of this product, refer to "2.1 Package Components" in this manual. If there
is any question or doubt about this product, contact your local distributor.

To use the product properly

Precautions for Safety:

• Both in this User's Manual and on the product itself, several icons are used to insure

proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.

• The icons' graphic images and meanings are given in "Chapter 1 Precautions for

Safety". Be sure to read this chapter before using the product.

Содержание M30220T-PRB







































Отзывы: