manualshive.com logo in svg

Renesas IDT Tsi574, Руководство пользователя

Поделиться
Скачать
Renesas IDT Tsi574 Скачать руководство пользователя страница 203

203

Tsi574 User Manual

June 6, 2016

Integrated Device Technology

www.idt.com

10. 

Clocks, Resets and Power-up Options

This chapter describes the clock and reset of the Tsi574. It includes the following information:

•

“Clocks” on page 203

•

“Resets” on page 207

•

“Power-up Options” on page 210

10.1

Clocks

The Tsi574 has three input clocks (S_CLK_p/n, P_CLK and I2C_SCLK) that are used to produce the 
Tsi574’s internal clock domains. 

In addition to these reference clocks, each RapidIO ingress port contains independent receive clock 
domains, one for each lane. The receive clock is extracted from the 8B/10B encoding on each lane.

Содержание IDT Tsi574



































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды