(3/4)
5. Connection Procedure
(See Figure 3)
The procedure for connecting the M3T-F160-100NRB is
shown below.
(1) Mount the NQPACK100RB on the user system.
(2) Attach the YQPACK100RB on the NQPACK100RB.
(3) Secure the four corners of the YQPACK100RB with the
YQ-GUIDE's.
●
Do not use the screws included with the
YQPACK100RB for fixing the YQPACK100RB.
●
Do NOT use the screwdriver included with the
NQPACK100RB for fixing the YQ-GUIDE's. That is
used only for the HQPACK100RB168 or
HQPACK100RB1622.
(4) Attach the probe of the emulation pod to the M3T-
F160-100NRB.
(5) Connect M3T-F160-100NRB to the emulator probe.
YQ-GUIDE -1
YQPACK100RB
NQPACK100RB
100-pin 0.65-mm-pitch
(PRQP0100JB-A,
formerly 100P6S-A) foot pattern
(5)
(4)
(1)
(2)
(3)
Use a slotted screwdriver.
●
: No.1 pin
Be sure to align the pins.
M3T-F160-100NRB
FLX160-PRB,
M3xxxxTx-EPB
or
M3xxxxTx-CPE
Figure 3 Connection procedure of the M3T-F160-100NRB
6. External Dimensions and a Sample Foot Pattern
21.8
40
.0
5.
3
16
.5
0.35
0.65
13.8
17.2
19
.8
23
.2
Unit: mm
55.0
●
1
M3T-F160-100NRB REV.A
MADE IN JAPAN
IC1
CN1
CN2
30
31
50
51
80
81
100
1a
1b
40a
40b
1a
1b
40a
40b
Figure 4 External dimensions and a sample foot pattern of the M3T-F160-100NRB
