Input Connections & Functions
RCA Cinch Inputs (INPUT):
This amplifier can be connected to any car stereo or head unit with low level RCA Cinch outputs.
RCA Cinch Outputs (OUTPUT):
Use this line output to send the fullrange audio signal to another amplifier.
Bass Boost-Controller (BASS EQ):
The Bass Boost elevates the lower bass frequencies. The desired elevation can be adjusted on the
”BASS EQ” controller between 0 dB up to + 12 dB.
Caution:
A too high bass boost may cause
clipping/distortion and a damage on the loudspeakers and also may harm your hearing abilities.
Use this controller carefully!
Lowpass-Filter (LOW PASS):
The LOW PASS controller adjusts the cut-off point of the frequency range to above. The cut-off
frequency is continuously adjustable from 40 Hz to 150 Hz.
Subsonic-Filter (SUB SONIC):
This controller (Sub Sonic) limits the ultralow and not hearable frequencies of the audiosignal to
below, to avoid a mechanical and electical overloading on the subwoofer. The cut-off frequency is
adjustable from 15 to 55 Hz and depends on the size of the subwoofer.
Level-Controller (INPUT LEVEL)
• Turn the INPUT LEVEL controller of the amplifier to the 5V position.
• Turn the volume controller of the headunit to 80 - 90% of its full setting.
• Turn the INPUT LEVEL controller clockwise until you hear some distortion.
• Then turn back the INPUT LEVEL controller slightly until you hear a cleaner sound.
Bass Remote-Controller (REMOTE)
Connect here the enclosed BASS REMOTE Controller to adjust the bass-level e.g. from the driver’s
seat. Please use only the enclosed bass remote controller and cable.
ENGLISH
4
REN 850 S
Содержание REN 850S
Страница 1: ......