MR18 F3R
Engine user manual V03, February 2021 Page
19
sur
29
6.2 Pedal/throttle/ewastegate learning
Pedal sensor voltages range
Pedal voltages must be in the below voltage ranges to able to success the learning.
Off pedal (0%)
Full pedal (100%)
Min value
(Volts)
Max value
(Volts)
Min value
(Volts)
Max value
(Volts)
Pedal sensor
RAW 1
1
3
3,1
4,9
Pedal sensor
RAW 2
1,8
4
0,2
1,75
Pedal/throttle learning procedure:
Duration approximately 30 seconds
1) Power off the car and press full throttle pedal while main switch is off.
2) Keep full throttle pedal, Turn ON main switch and keep full throttle pedal position for 6-7 seconds.
3) Release the throttle pedal (= remove completely the foot from it) and wait for the end of the
automatic pedal/throttle learning procedure (motorized throttles are going
successively
to MIN
–
>
MAX
–
> IDLE positions).
4) Make power cycle when learning is succeeded
It is possible to hear the motorized throttles during calibration. If
nothing happens, you must proceed to the complete
pedal/throttle learning procedure again.
