Renault MEGANE COUPE CABRIOLET, Руководство водителя

Страница: 23 / 242

1.17
Adjusting the seat position
To move the seat base forwards or
back , move switch 4 forwards or back-
wards.
To raise or lower the seat base , move
switch 4 upwards or downwards.
Adjusting the seatback:
To tilt the seatback , move the top of
switch 3 forwards or backwards.
FRONT SEATS WITH ELECTRIC CONTROL
1
4
3
2
5
Make sure that the seat-
backs are correctly locked
in place.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts is
not reduced.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
Heated seats
(depending on vehicle)
With the engine running, turn control 1
to either position 1 , 2 or 3 (depending
on the temperature required). An in-
dicator light on the instrument panel
lights up once the front seat heating
system is operating.
The system, which has a thermostat,
decides whether or not the heating is
needed.
Adjusting the lumbar support
on the driver’s seat
Lower handle 5 to increase the support
and lift to decrease it.
Special note
On equipped vehicles, buttons 2 are
used to store the chosen driving posi-
tion (refer to the following page).