RR-Addendum_COUNTERWEIGHTS_2017-09
ADDENDUM
—
RENAISSANCE RUMFORD
INSTALLATION
These instructions replace the “Door and Firescreen Installation” section
of the
manual.
NEW installation method for the counterweights:
Openings A and C have been added to the fireplace facing. The openings will be
covered by cement board and do not have finishing metal cover plates.
Start by placing the three counterweight cables through the new
openings and over the pulleys. Allow the cables to hang down towards the door.
Place each counterweight in its respective channel opening (A or C). On the right side, the
larger counterweight enters the rear channel and the smaller counterweight enters the front
channel. Ensure the smaller counterweight has extended metal plate oriented towards the
back of the fireplace. The counterweights are supported by pre-installed blocking rods.
Ensure the blocking rods are in position before inserting the counterweights.
x2 on
Right
Blocking
Rod
Blocking
Rod
x3 counterweight
cables
