Rena AS-150, Руководство по обслуживанию

Страница: 52 / 59

SECTION 6
MAINTENANCE
50
Cleaning
WARNING!
PRINTER IS A PRECISION MACHINE THAT SHOULD BE CLEANED
REGULARLY TO INSURE MANY YEARS OF SERVICE. BEFORE PERFORMING
ANY MAINTENANCE, DISCONNECT PRINTER FROM ITS POWER SOURCE!
Printer must be cleaned regularly of accumulated paper dust and ink. Depending on types of media run,
paper dust may accumulate within Printer and on Transport. Before cleaning Printer, unplug it from power
receptacle and remove covers.

Internal Areas: Best cleaned using a vacuum with a soft brush attachment to help loosen dust
particles. Take care not to damage PC Boards or electrical wiring.

Exterior: May be cleaned with any standard non-abrasive household cleaner that does not
contain plastic-harming solvents.
CAUTION
NEVER SPRAY OR POUR CLEANERS DIRECTLY ON OR INTO PRINTER.
EXCESS LIQUID COULD HARM ELECTRONIC PARTS. ALWAYS DAMPEN A
RAG WITH THE CLEANER AND APPLY IT TO PARTS TO BE CLEANED.
Feed Rollers and Forwarding Rollers
Feed and Forwarding Rollers can become glazed with paper lint and ink from media.
Clean regularly with a mild abrasive household cleaner on a damp cloth.
Avoid using solvents on Rubber Rollers.
Cleaning Media Sensor
Periodically check Media
Sensor, (
located under Inkjet
Cartridge Holder ).
1. Remove two screws
attaching Holder to
Side Frame
[A] ( one
on each side of
Holder
).
2. Carefully lift up and
turn Holder over.
DO NOT damage or
strain Ribbon Cables
or Media Sensor
wiring.
Use a vacuum with a soft brush
attachment or dry compressed air to remove any dust or debris from Sensor [B] .