7
Or chose Browse to select installation folder where you want to locate.
Step 6.
It takes a few seconds for copying the utility files and then click on
Finish to complete the installation
Step 7.
Message that notifies you to restart your computer may pop up.
Select Yes. It will shut down your computer and restart.
Step 8.
Insert the WU110 - USB WLAN Adaptor into USB slot, windows will
install the driver automatically.
Step 9.
If the Configuration & Monitor Utility icon is not on system tray, it
shows the installation is not successful. Run setup.exe again, and
then chose “remove” item from menu to uninstall program. After
restart your PC again. go to Setp 3.
If you find the Red sign on system tray, which means your Wireless
LAN Adaptor haven’t connected to an Access Point Successfully.
Please double-click on the red sign on system tray to open
Configuration & Monitor Utility. Select Site Survey tab, and click
Re-Scan to find all site nearby. You may double-click on the
site(BSSID) that you want to connect to.
Step 10.
Modify TCP/IP settings of Windows. You can select either Static or
DHCP setting. If you use the static IP setup then enter the IP value,
Subnet masking, DNS, and Gateway Address values. After setting
these parameters appropriately, click OK to make the settings
available. If you are operating on Windows 95/98, message that
notifies you to restart your computer should pop up. Select Yes. It
will shut down your computer and restart to make settings available.
