Remotec ZXT-120, Руководство пользователя

Страница: 9 / 23

9
The primary controller should indicate that the action was successful.
If the controller indicates the action was unsuccessful, please repeat
the procedure.
IR Code Selection
ZXT ‐ 120 is with built ‐ in IR AC code library, user may select the IR code
using Configuration Command Class.
Step Setup Key
LED Indication Status
on ZXT ‐ 120
1
After included ZXT ‐ 120 to Z ‐ Wave
controller or Gateway, go to device
setup for configuration on gateway
or controller.
‐
2
Input parameter number “27” and
parameter value (please look up the
code list of ZXT ‐ 120 according to
your AC brand). Then complete the
configuration process.

LED flashes twice
when ZXT ‐ 120
receives the
configuration
setting
3
Press the PROG button on the ZXT ‐
120. (this step apply when using
ZRC ‐ 100 or other portable controller
for set up, if using gateway, user can
skip this step)

LED flashes twice
when ZXT ‐ 120
receives the
configuration
setting
4
Go back to the control page of ZXT ‐
120 on the gateway and try the
function such as (cool, temperature
set).
If the air conditioner does not
respond to the command you set on
Gateway (Cool, Heat, Auto,
Temperature set etc.), repeat step 2
and 3 to select the next code on
code list.

LED flashes once
every time it
receives a
command from
gateway

Important Information

Different brand or model of air conditioner has different
function. For example, some air conditioner only support
temperature set from 18
o
C ‐ 30
o
C, if user set 17
o
C on gateway,
ZXT ‐ 120 will not respond.

There are more than 1 code for each brand, some does not