27B
All information contained on this sheet is the property of Remote King PTY LTD. Unauthorised use or reproduction is prohibited.
RCG12C - GARAGE
REMOTE PROGRAMMING
The following procedure is for programming a RCG12C remote to your garage door:
Or
Press and hold the same
button again for 2 seconds.
Release the ‘Door Code’
button. Your new remote is
now programmed.
Press and hold the ‘Door
Code’ button on the reciev
er board. Continue holding
through steps 3, 4 & 5.
Press and hold a transmitter
button on your new
remote for 2 seconds.
Release the button for 2
seconds.
1
2
6
3
4
5
RCG12C
1
Identify your roller door motor.
If necessary remove the light
cover to reveal the Control
Panel.
Identify your sectional door
motor. On the motor locate
the Control Panel.
