ROTOTOM ASSEMBLY INSTRUCTIONS
Turn the long carriage bolt clockwise until it makes contact with the bottom insert.
Place stand and tilter in
the upright position.
Slide the short carriage bolt into the Rototrac approximately to the midway point. Tighten the AD10 adaptor plate to the
Rototrac using the washer, nut, and included wrench. Place Rototrac assembly on top of the Ratchet Block Tilter.
Tension Rod
Ratchet Block Tilter
Rototrac
AD10 Adaptor Plate
Short Carriage
Bolt
Notch