Remo+ RemoBell W, Быстрый старт, Страница: 7 / 16

7
1. Remove your existing doorbell and disconnect the wires.
2. Based on your doorbell
location, adjust the
camera’s viewing angle by
choosing the appropriate
Mount type.
3. If you use the Angle Mount
or the Wedge Mount,
follow Option A .
If you are only using the
Bracket, follow
Option B
.
DOORBELL MOUNTING
Option A
15° Angle
Mount
5° Wedge
Mount
4-1. Place the Mount onto the wall
and mark the screw placement in
the mounting holes.
* For hard surfaces like brick and stucco,
use a drill and 5mm drill bit to make holes.
Then insert the Anchors.
4-2. Secure the Mount onto the wall
using a screwdriver and the longer
enclosed Mounting Screws.