2
Installing the heat pump
Check the delivery for external damage.
Due to the size and weight of the WKF-compact
indoor unit, it is delivered in two parts.
In order to move and install the indoor unit properly
in the installation space, refer to and carry out the
following steps:
1.
Place the indoor unit and the storage tank as
close to each other as possible in the instal-
lation space. (Fig. 1)
Fig. 1: Heat pump in delivery state
2.
Cut the straps and remove the box and pro-
tective film. Check the indoor units for
damage. (Fig. 2)
Fig. 2: Remove the boxes and the film and check
for damage
7