REMKO WKF 120 compact, Инструкция по сборке, Страница: 10 / 20

10. Release the casing of the indoor unit
Fig. 12: Release the cover
11. Cut out the EPP housing sufficiently in
accordance with the marking on the back-left
corner using a knife.
Fig. 13: Cut out the EPP housing
12. Take the indoor unit and install it on the very
back of the storage tank until it is optimally
integrated completely into the bottom part of
the EPP.
Now connect the two rear corrugated pipes
to the two free connections. Closed using a
cap in the factory!
IL-HP connection to changeover valve
(Fig. 15)
RF-HP connection behind the changeover
valve
NOTICE!
Use the seals included in the box of
accessories!
A
B
Fig. 14: Install the indoor unit on the storage tank
Fig. 15: Connecting inlet to changeover valve
Fig. 16: Connecting inlet to changeover valve
REMKO WKF-compact
10