REMKO Wi-Fi stick Smart-Control, Инструкции по эксплуатации и монтажу, Страница: 10 / 20

4 Assembly and
installation
The Wi-Fi stick is inserted into the existing inter-
face. The interface is located on the SKW, RVT
and ATY series units on the display board, which is
attached on the right behind the unit's panel. The
installation can be carried out as follows:
SKW
1. Disconnect the system from the power
supply.
2. Open the unit cover.
3. Loosen the screw on the socket of the dis-
play board and remove the display board
from the unit trim.
4. Insert the Wi-Fi stick into the designated
interface.
5. Place the display board including the socket
in its original position and fix it with the screw.
6. Close the unit cover.
RVT
1. Disconnect the system from the power
supply.
2. Open the unit cover.
3. Loosen the screw on the socket of the dis-
play board and remove the display board
from the unit trim.
4. Insert the Wi-Fi stick into the designated
interface.
5. Place the display board including the socket
in its original position and fix it with the screw.
6. Close the unit cover.
ATY
1. Disconnect the system from the power
supply.
2. Open the unit cover.
3. Loosen the screw on the socket of the dis-
play board and remove the display board
from the unit trim.
4. Remove the interface for the Wi-Fi stick from
the socket, turn it 180° and reinsert it in the
socket.
REMKO Wi-Fi stick Smart-Control
10