Safety notes
Disposal of equipment and
components
Only recyclable materials are used
in the manufacture of the devices
and components.
Help protect the environment by
ensuring that the devices or com-
ponents (for example batteries) are
not disposed in household waste,
but only in accordance with local
regulations and in an environmen-
tally safe manner, e.g. using certi-
fied firms and recycling
specialists or at collection
points.
Intended use
Depending on the model, the
equipment and the additional
fittings with which it is equipped
is only intended to be used as an
air-conditioner for the purpose of
cooling or heating the air in an
enclosed room.
Different or additional use shall
not be classed as intended use.
The manufacturer/supplier assumes
no liability for damages arising from
an unintended use of the equip-
ment. The user bears the sole risk in
such cases.
Using the equipment as intended
also includes working in accord-
ance with the operating manual
and installation instructions and
complying with the maintenance
requirements.
Carefully read the operating in-
structions before commissioning the
equipment for service. It provides
useful tips and information as
well as hazard warnings to prevent
injury or material damage . Fail-
ure to follow the directions in this
manual can result in endangerment
to persons, the environment and
the equipment itself and will void
any claims for liability.
■
Keep this manual and the refrig-
erant data sheet near the unit.
■
The unit should be set up and
installed only by qualified per-
sonnel.
■
The set-up, connection, and
operation of the unit and its
components must be in accord-
ance with the operating condi-
tions stipulated in this manual
and comply with all applicable
local regulations.
■
Mobile units must be set up
securely on suitable surfaces and
in an upright position. Station-
ary units must be permanently
installed for operation.
■
Modification of equipment and
components supplied by REM-
KO is not permitted and can
cause malfunctions.
■
Equipment and components
may not be operated in areas
where there is an increased risk
of damage. Observe the mini-
mum clearances.
■
The electrical supply is to be
adapted to the requirements of
the equipment.
■
The operational safety of equip-
ment and components is only
assured if they are fully as-
sembled and used as intended.
Safety devices may not be modi-
fied or bypassed.
■
Do not operate equipment or
components with obvious de-
fects or signs of damage.
■
All housing parts and openings
in the device, e.g. air inlets and
outlets, must be free of foreign
objects, fluids, or gases.
■
The equipment and components
must be kept an adequate dis-
tance from flammable, explo-
sive, combustible, abrasive and
dirty areas or atmospheres.
■
Touching some parts of the
equipment can result in burns or
other injury.
■
Installation, repair and mainte-
nance work may be carried out
only by authorised specialists.
Visual inspections and cleaning
can be performed by the opera-
tor as long as power is discon-
nected from the equipment.
■
To preclude any danger from
the equipment, take appropri-
ate hazard-prevention measures
when performing installation,
repair or maintenance work or
cleaning the equipment.
■
The equipment or components
are not to be exposed to any
mechanical stresses, extreme
levels of humidity or direct
sunlight.
Warranty
Prerequisites for possible warranty
claims are customer or his accept-
ing representative has completely
filled out the "warranty registration
card" supplied with the unit and
was completely filled out and re-
turned to REMKO GmbH & Co. KG
and placing the unit in service.
The warranty conditions are listed
in the "General terms and condi-
tions". Furthermore, only the par-
ties to a contract can strike special
agreements beyond these condi-
tions. For this reason please contact
your contractual partner in the first
instance.
Disposal of packaging
All products are packed for trans-
port in environmentally friendly
materials. Make a valuable con-
tribution to reducing waste and
sustaining raw materials. Only
dispose of packaging at approved
collection points.
Environmental
protection
and recycling
REMKO MKT
4
