REMKO KFB 4, Инструкции по эксплуатации и монтажу

Страница: 9 / 20

Remote control display
4
3
2
1
8 7 5 9
10
11
12
13
6
14 15
Fig. 3: Remote control display
1
Mode
The selected room air conditioning mode is shown
at the top of the display.
2
Fan stage
The current fan speed is indicated here by bars. If
the automatic fan is activated, the “Auto” symbol is
displayed.
3
Operating status
If the fan wheel is stationary on the display, the unit
is deactivated. A rotating fan wheel indicates active
unit operation.
4
Unit display
If this symbol appears on the display, the LEDs
and the display on the unit are activated. If the unit
display is deactivated, the symbol on the display
goes out.
5
Quiet mode If this symbol appears on the dis-
play, Quiet mode is activated. If Quiet mode is
deactivated, the symbol on the display goes out.
6
Energy saving function
If this symbol appears on the display, the energy
saving function is activated. If the energy saving
function is deactivated, the symbol on the display
goes out.
7
Auxiliary heater (not fitted)
If the connected indoor unit is equipped with an
additional auxiliary heater, this symbol is displayed
in the activated state.
8
Follow me
If this symbol is shown on the display, the room
temperature is regulated on the cabled remote
control instead of on the indoor unit for control pur-
poses
9
Digital display
The digital display shows the set room target tem-
perature on the main screen and is also used to
display settings and setting values in the Service
menu.
10
Switch-on delay
This text is displayed when the switch-on delay is
set or activated.
11
Switch-off delay
This text is displayed when the switch-off delay is
set or activated.
12
Digital timer display
The digital display for the timer is displayed in com-
bination with the display for the switch-on or
switch-off delay and shows the remaining time until
activation or deactivation after successful setting.
13
External block
This symbol is displayed if some functions of the
cabled remote control are disabled by a higher-
level controller (e.g. MCC1).
14
Air filter cleaning
This symbol is displayed when a certain number of
operating hours has been reached and filter
cleaning is to be carried out.
15
Swing fins
The arrow on the symbol indicates the currently set
angle of the air outlet fin. If an arrow is displayed at
all positions, the oscillating swing function is acti-
vated.
9