REMKO ETR 1-10, Инструкции по эксплуатации и монтажу, Страница: 12 / 16

6 Electrical wiring
Important information prior to installation
DANGER!
All electrical installation work is to be performed
by specialist companies. Disconnect the power
supply when connecting the electrical terminals.
NOTICE!
Errors on connection can cause damage to the
control unit! No liability will be assumed for
damage caused by incorrect connection and/or
improper operation!
NOTICE!
Prior to maintenance or set-up work, the ther-
mostat must be disconnected from the mains
power supply.
n The connection must be carried out in accord-
ance with the enclosed connection diagram.
n Observe VDE 0100 and EN 60730, Part 1.
n The regulations of the local power supply com-
pany must also be observed.
n To avoid malfunctions, the probe lines must not
be routed together with other live lines.
n In the event that the unit does not function,
begin by verifying that it is correctly connected
and that there is a 230 V power supply present.
Electrical drawings
3
L REL
2 1
N
PT GND
3 2 1
1
2
Fig. 5: Electrical drawings
1: Thermostat connection plug
2: Temperature probe
REMKO thermostats
12