5.
Dirt can also be removed by carefully
cleaning with lukewarm water and mild
cleaning agents. To do so, turn the dirty side
so it is facing down (Fig. 32).
6.
If water is used, let the filter dry out properly
in the air before fitting it back into the unit.
7.
Carefully insert the filter. Ensure that it
locates correctly.
8.
Close the front side as described above in
reverse order.
9.
Switch the power supply back on.
10.
Switch the unit back on.
Fig. 30: Open the unit trim upwards
Fig. 31: Cleaning with a vacuum cleaner
Fig. 32: Cleaning with lukewarm water
Cleaning the condensate pump (accessories)
The indoor unit may contain an optional integrated
or separate condensate pump, which pumps out
any accumulated condensate into higher posi-
tioned drains.
Observe the care and maintenance instructions in
the separate operating manual.
REMKO ATY
44
Содержание ATY 265
