3.3 LAN function
Installation and setup of the LAN function
System requirements
The following system requirements are necessary
to complete the LAN function installation success-
fully:
n
REMKO Smart Control Touch controller with
software version 4.24 or higher
n
JavaScript/HTML5-capable web browser
(version not more than two years old)
n
Broadband internet connection of at least
10 mbit/s
n
The WLAN router must support WPA 2 encryp-
tion/security standard
Installation in house
The central controller for the REMKO heat pump
via a smart phone or other mobile devices can be
installed virtually anywhere in the building.
The connection requires a router which is con-
nected directly to the control unit of the heat pump
via LAN.
NOTICE!
The router must be set up by a specialist
The LAN function is limited to the in-house LAN
network of the operator only. Outside the net-
work, access to the heat pump parameters is
not possible.
1
WLAN
2
Fig. 3: External access
1: Router (example)
2: REMKO Smart Control Touch
REMKO Ethernet adapter
10
