background image

Register Your New Product Today!

By registering your new Remington

®

 product, you will receive these important benefits:

Proof of Ownership Product Protection Product Registration Special Offers

Register online at: RemingtonProducts.com

IMPORTANT SAFETY 

INSTRUCTIONS

When using an electrical appliance, basic precautions should always be observed, 

including the following. 

Please read all instructions before using this shaver.

WARNINGS 

To reduce the risk of burns, fire, electric shock, or injury to persons:

•  When connecting the charging unit to a power source outside of the USA or 

Canada, use a plug adapter suitable for the power outlet. This device has a 

charging adapter that will work with worldwide 100V-240V power outlets.

•  Only use the power adapter provided with this device.
•   Do not reach for the appliance if it has fallen into water while plugged into the 

power source. Unplug from the power source at the wall immediately.

•  Appliance may be rinsed under water or used in the shower, but never use the 

charging unit in the shower.

•  Detach the appliance and charging unit from the power source before cleaning.
•   Except when charging, always unplug this appliance immediately after using.
•  When recharging place in a safe position, out of the reach of children and pets.
•  Close supervision is necessary when this appliance is used by, on, or near 

children or individuals with certain disabilities or special needs.

•  Use this appliance only for its intended use as described in this manual.
•  Do not use attachments not recommended or provided by the supplier.
•  Never operate this appliance if the electrical cord is frayed or the plug is damaged.
•  Keep the electrical cord away from heated surfaces.
•  Never drop or insert objects into any of the appliances openings.
•  This appliance is intended for household use only.
•   Do not use outdoors, or operate where aerosol (spray) products are being 

used, or where oxygen is being administered.

•  Always attach the plug to the appliance, then to the wall outlet. To disconnect, 

turn all controls to OFF, then remove plug from outlet.

•  Always pull on the plug body to unplug the appliance from the wall socket. 

Never pull on the electrical cord. 

•  Do not plug in or unplug this appliance when your hands are wet.
•  Do not use extension cords or a voltage converter with this appliance.
•  Do not wrap the power cord around the appliance.
•  Always store the appliance and charger in low moisture area. 
•  Do not expose the appliance to temperatures over 140° F (60° C).
•  Detach removable power cords from the appliance during storage.
•   Do not use this appliance if the cutting head surfaces are damaged or broken 

as facial injury could occur.

•   This shaver and trimmer are intended for use on facial hair only. It should not 

be used for longer hair on your head or body.

 Product Features

KEY FEATURES 

1.

   Rotary shaver head

2.

   Pop-up detail trimmer 

3.

   Main body

4.

   Charging pins

5.

   Power on/off button

6.

   Battery Indicator display

7.

   Grooming head

8.

     Adjustable comb

9.

  Storage bag

10

. Deep cleaning brush

11

. Brush mount

12

. Daily cleaning brush (XR1410 only)

13

. Pre-shave brush (XR1410 only)

14

. Charging adapter (not shown)

 Charging

Before using, read the important safety instructions in front of the manual.
1.

 Plug power adaptor into unit.

2.

 Charge unit for 24 hours before its first use. 

3.

 Use unit until recharge is required.

CAUTION!

•  Make sure the unit and your hands are dry when charging.
•  Always charge the unit in a cool, dry place.

Use with gel or foam in  

the shower for ultimate comfort.

SAVE THESE INSTRUCTIONS

LED lights display the battery charge level

•  Low Charge: Top LED light will glow solid red to indicate the shaver needs to be 

recharged. There is less than 5 minutes of run time remaining.

•  Charging: Bottom LED light will glow solid green to indicate the battery is taking a 

charge.

•  Full Charge: When fully charged the green LED light will go off.

1.

  The unit should be turned off when changing attachments.

2.

  Remove the attachment by lifting upward from the base.

3.

  After selecting the attachment you want, align the hexagon shapes of the base 

and attachment and press to snap the attachment onto the base. 

4.

  For brush heads, first snap the brush mount onto the base. Then snap the 

cleansing or pre-shave brush onto the brush mount.

Cleansing

1.

  Add a drop of facial cleanser to the brush head and dampen under the faucet or shower. 

2.

  Press on/off button to turn on. 

3.

  Divide your face into 4 main sections; forehead, nose and chin, left cheek, right cheek.

4.

  While applying gentle pressure, move the rotating brush in circular motions over 

each section for approximately 30 seconds.

Grooming

1.

  Use the grooming head without the adjustable 

comb for trimming hair close to the skin.

2.

  Attach the comb onto the groomer head by hooking 

the front of the comb over the trimmer blades, then 
snapping the comb down onto the groomer.

3.

  Adjust the comb setting to desired length by 

rotating the wheel clockwise to increase length 
and counterclockwise to reduce length. 

4.

  Press on/off button to turn the groomer on. 

5.

  Place the groomer head against the skin and slide 

against the growth direction of hair. 

Pre-Shave

Use the silicone pre-shave massage brush to exfoliate skin and lift hair for an extra 
close shave.

1.

  Dampen the silicone pre-shave massage brush.

2.

  Press on/off button to turn on. 

3.

  While applying gentle pressure, move the rotating brush in circular motions over 

each section of face.

Shaving

Note: 

If shaving with gel or foam, first wet face and then apply to applicable area. 

1.

  Press on/off button to turn the shaver on.

2.

  Hold the shaver at a right angle to the skin so that all three heads are touching 

the skin with equal pressure.

3.

  Stretch the skin with free hand so hairs stand upright. 

4.

  While applying light pressure, use short, circular strokes to shave the face

5.

  Rinse shaver under warm water to clean away excess gel or debris. 

 LED Battery Indicators 

 Changing the Attachments  

 Instructions for Use 

 Instructions for Use 

 Cleaning and Care 

1

9

10

11

13

12

3

4

2

5

6

7

8

Use and Care Guide

XR1400
XR1410

This is a wet/dry appliance.  

The appliance may be cleaned under warm water.

NOTE:

 

When cleaning your shaver, make sure the shaver is turned off  

and disconnected from the power cord.
CAUTION! 

•  To clean the external surfaces of the shaver, use a damp cloth. Do not use strong 

detergents or other chemicals.

•  To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer or 

heater to dry the shaver.

A

C

B

Daily:

1.

  Pull rotary head face of shaver off of lower hair pocket. (Diagram B)

2.

  Tap out excess hair shavings. (Diagram C)

3.

  Rinse the head of the shaver in running water. 

4.

  Close head assembly.

Comb 

Position

~Cut 

Length

1

3/32"

 (2mm)

2

1/8"

 (3mm)

3

5/32"

 (4mm)

4

3/16"

 (5mm)

5

1/4"

 (6mm)

Отзывы: