Battery Removal
When your rechargeable shaver
reaches the end of its useful life,
the batteries must be removed from
the shaver and recycled or disposed
of properly in accordance with your
state and local requirements.
How to Remove the Batteries
from the WDF-4830
(See diagrams to right)
1. Remove screw from bottom of shaver.
2. Separate top and bottom housings.
3. Unscrew and remove inner frame.
4. Open the inner housing and remove
the batteries.
5. Insulate battery ends by (1) placing
each battery individually into separate
plastic bags or (2) covering the
terminals of each battery completely
with plastic or non-conductive
electrical tape.
120 VAC, 60 Hz
© 2010 ROVCAL, INC.
® REMINGTON and SMOOTH & SILKY
are Registered Trademarks of
ROVCAL, INC.
09/10 Job# 40168
Questions or comments:
Call 800-736-4648 in U.S.
or 800-268-0425 in Canada. or visit
www.RemingtonProducts.com
Dist. by: Spectrum Brands, Inc.,
Madison, WI 53711
Dist. by:
Spectrum Brands Canada, Inc.
Mississauga, ON L5L 0A1
Designed in USA T22-30587
Manufactured to Remington’s
specifications in the PRC.
Performance Guarantee
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state
or province to province. Some states
do not allow the exclusion or limita-
tion of incidental, special or conse-
quential damages.
Performance Guarantee
Spectrum Brands, Inc.
Money-back Offer
If within 30 days after you have
purchased your Remington
®
branded
product, you are not satisfied and
would like a refund, return it with
the sales slip indicating purchase
price and date of purchase to the
retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse
all retailers who accept the product
within 30 days from the date of pur-
chase. If you have any questions con-
cerning the money-back guarantee,
please call 800-736-4648 in the US
or 800-268-0425 in Canada.
This warranty does not cover
products damaged by the following:
●
Accident, misuse, abuse or
alteration of the product
●
Servicing by unauthorized persons
●
Use with unauthorized accessories
●
Connecting it to incorrect current
and voltage
●
Wrapping cord around appliance
causing premature wear &
breakage
●
Any other conditions beyond our
control
SPECTRUM BRANDS, INC.
SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF
THIS PRODUCT. ALL IMPLIED
WARRANTIES, INCLUDING
BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND
MERCHANTABILITY, ARE LIMITED
IN DURATION TO TWO YEARS FROM
DATE OF ORIGINAL PURCHASE.
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workman-
ship for a two-year period from the
original date of consumer purchase.
This warranty does not include
damage to the product resulting
from accident or misuse.
If the product should become defec-
tive within the warranty period, we
will replace it free of charge. Return
your product and sales receipt with
your name, address and day time
phone number to: Remington Returns
Center, 507 Stokely Dr., P.O. Box 1,
Deforest, WI 53532. For more infor-
mation call 800-736-4648 in the US
or 800-268-0425 in Canada.
Warranty excludes:
●
Foils and cutters
KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
Warranty
Cleaning & Maintenance
How To Use
Contains a
listed adaptor
screw
screws
CARE FOR YOUR SHAVER
To ensure long lasting performance of
your shaver, clean the head assembly
regularly. The easiest and the most
hygienic way to clean the shaver is by
rinsing the shaving head after use with
warm water. Always keep the protec-
tive headguard on the shaving head
when the shaver is not in use.
AFTER EACH USE
1. Ensure the shaver is turned off.
2. Press the release buttons to open
the shaver head.
3. Blow on the foils to remove any
loose debris.
4. Brush or rinse the accumulated
hair from the main body of the shav-
er, shaving head and cutter assembly.
5. Leave the head assembly open to
let the shaver dry completely.
6. Return the shaving head to its
original position and snap in place.
NOTE:
●
Ensure that the shaver is turned off
when cleaning.
●
Do not clean the shaving foils with
the brush.
●
At regular intervals, put a drop of
sewing machine oil onto the foils
and cutters head.
REPLACING THE FOILS & CUTTERS
Signs that your foils and cutters need
replacing:
●
Irritation: As foils get worn, you may
experience skin irritation.
●
Pulling: As the cutters wear, your
shave may not feel as close and
you may feel your cutter pulling on
your hair.
●
Wear: You may notice that the
cutters have worn through the foils.
To ensure the continued highest quality
performance from your shaver, we
recommend that foils and cutters are
replaced every 6 months.
NOTE: The replacement part for your
shaver model is SPW-480.
To order shaver accessories, contact
us at 800-392-6544 or visit us at
www.RemingtonProducts.com
Your shaver is suitable for legs, under-
arms and the bikini area. It can be
used dry or in the shower.
FOR EVERYDAY SHAVING
1. Remove protective cap.
2. Turn the shaver on.
3. Hold the shaver at a right angle to
your skin and move the shaver against
the direction of the hair growth.
4. After shaving, turn shaver off.
NOTE: Before dry shaving, make sure
that the area is clean, dry and free
from creams or oil.
If you have not shaved for a while,
use the flexible trimmer before shav-
ing. This will help you achieve a more
effective shaving result.
1. Turn shaver on.
2. Hold the shaver with the trimmer
facing your leg and slightly tilted
towards you (approximately at a 45º
angle).
3. Move the trimmer slowly against the
direction of the hair growth.
4. After shaving, turn off shaver.
TRIMMING AND SHAPING
1. Attach the bikini trimmer headguard.
2. Turn the shaver on.
3. Hold the shaver at a right angle
to your skin and press down gently.
4. Edge and shape the area as desired.
5. After shaving, turn off shaver.
FOR BEST SHAVING PERFORMANCE
We recommend that you use your new
shaver daily for two or three weeks to
allow time to find the optimum shaving
methods for your particular type of hair
growth patterns.
CAUTION
If your skin is easily irritated by shav-
ing, or you suffer from skin allergies,
you should test a section of your arm
or leg before using the shaver.
NOTE:
●
The shaver IS suitable for use in the
bath or shower.
●
Do not rinse with water hotter than
160ºF.
●
Do not completely submerge the
shaver in water.
tabs
new foil
TO REPLACE THE FOIL
1. Ensure the shaver is switched off.
2. Gently push the small plastic tabs
at either end of the foil carrier. The
foil carrier should then easily detach
from the shaving head.
3. To reassemble, snap the new foil
carrier into position.
4. Close the shaving head.
CAUTION
●
Only hold the plastic to prevent
damage to the foil.
●
Do not press on the foil when
replacing.
TO REPLACE THE CUTTERS
1. Ensure the shaver is switched
off and open the shaving head
(as above).
2. To remove cutter, grasp cutter
between thumb and forefinger and
pull upward.
3. To reassemble cutter, place cutter
onto oscillator tip. Gently push down
clicking into position.
Visit www.RemingtonProducts.com
for FAQ, tips & more
