080757_REM_IFU_EP3000_EP4000_22L.indd Sec2:4
080757_REM_IFU_EP3000_EP4000_22L.indd Sec2:4
05.11.2008 14:18:44 Uhr
05.11.2008 14:18:44 Uhr
ENGLISH
4
CARE FOR YOUR EPILATOR
To ensure long lasting performance of your epilator, clean the head assembly regularly.
Always keep the protective cap on the epilation head when the epilator is not in use.
AFTER EACH USE
CLEANING THE EPILATION HEAD
Ensure the epilator is turned off and disconnected from the mains.
Press the head release button/s and open the head assembly. (Diagram G)
Turn the head assembly upside down.
Using your thumbs, push the small sides together and push the epilation head upwards. This releases the
curved epilation head.
Brush the accumulated hair from the tweezers by turning the barrel manually.
NOTE: The body of the epilator is not washable. Do not submerge in water.
TO REMOVE RESIDUE
To remove residue from the stainless steel tweezers, dampen a swab with alcohol. Gently run the swab
over the tweezers until the residue has been removed.
CAUTION: Make sure that the cotton swab is not soaked in alcohol as this may damage the epilator.
Not suitable for cleaning under water.
