ENGLISH
2
INSTRUCTIONS FOR USE
SMOOTH AND SLEEK (Fig 1)
Before use, make sure hair is clean, dry and tangle-
free.
Plug in the unit and set to your desired temperature.
The bars on the LCD will flash until your desired
temperature is met.
For extra protection and best results, section hair
prior to straightening and spray with heat protection
spray. Always straighten the lower layers first.
Run the straightener through the entire length of the
hair, without stopping for a Smooth and Sleek finish.
Repeat only twice per section to prevent hair damage.
PROFESSIONAL CURLS (Fig 2)
Firmly grip a section of hair between the plates, close to
the roots.
Keeping tension firm gently rotate the styler whilst pulling
through the length of the hair section to the tips using the
curl guides to grip and shape the curl as you style.
Make sure to keep rotating the styler.
Remove styler and holding the hair length, allow the curl
to spring into shape.
Repeat using different size sections of hair for a natural
soft curl look.
For all other styles see included DVD
IMPORTANT INSTRUCTIONS
Due to the extreme heat capabilities of this styler, extra care should be taken when using.
While heating and cooling, place on flat, smooth, heat-resistant surface. Only hold unit at
the end of the handle.
This is a high performance product, avoid frequent use to prevent damage to hair.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surface, as this will deteriorate the effectiveness of the coating.
FIG 1
FIG 2
080748_REM_IFU_S1051_20L.indd GB_2
080748_REM_IFU_S1051_20L.indd GB_2
05.11.2008 17:46:15 Uhr
05.11.2008 17:46:15 Uhr
