4
5
6
s8580aU sMart styLer
Use and care instrUctiOn ManUaL
Thank you for purchasing your new Remington® Smart Styler. Smart Styler
features a heat sensor strip embedded in the Premium Ceramic plates that
protects your hair from heat stress while styling.
sMart sensOr tecHnOLOgy
How does it work?
Embedded into the top plate is a computerised Smart Sensor that detects the
hair’s exposure to excessive heat. When activated this smart heat sensing
strip will constantly monitor the moisture and condition of the hair being
styled and will automatically optimise the temperature to your personal
setting. This automatic adjustment protects the hair’s condition.
Basic Hair care instrUctiOns
For optimal results, shampoo and condition your hair prior to styling.
Dry your hair thoroughly before using the styler and make sure that it is
tangle free.
Smart Styler is not suitable for use on synthetic hair wigs or hair extensions.
aUtOMatic VOLtage adJUstMent
The Smart Styler features automatic voltage adjustment for international use.
Plug the unit into any domestic power outlet and it will adjust automatically to
the voltage being supplied.
note:
- Some countries will require the use of a plug adaptor that is not
included with your styler.
HOW tO Use yOUr reMingtOn® sMart styLer
Place the styler on a flat, hard, heat resistant surface ensuring the sides of
the plates do not come into contact with the surface. Plug in to any
household (120/240V AC) power outlet. Press the on/off switch.
The digital display on the top of the styler will illuminate and the temperature
setting will default to 200ºC. The digital display will flash while the plates are
heating to the temperature selected. When the temperature selected has
been reached the display will be steady.
To select a higher temperature press the ‘+’ temperature increase button. To
select a lower temperature press the ‘–‘ temperature decrease button. The
temperatures that can be selected are 160°C, 180°C, 200°C, 220°C and
230°C.
The styler will be ready to use in 15 seconds depending on the temperature
selected.
To switch your styler off, press and hold the on/off switch for 1 second.
iMPOrtant safegUards
Warning: Do not use this appliance near bath tubs,
showers, basins or other vessels containing water.
When using electrical appliances, especially when
children are present, basic safety precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
For additional protection, the installation of a residual
current device (RCD) having a rated residual operating
current not exceeding 30 mA is advisable in the
electrical circuit supplying the bathroom. Ask your
installer for advice.
KEEP AWAY FROM WATER
DANGER – As with most electrical appliances, electrical
parts are electrically live even when the switch is off.
To reduce the risk of death by electric shock:
• Always unplug it immediately after using.
• Do not place or store an appliance where it can fall or
be pulled into a bath or sink.
• Do not use while bathing.
• Do not place or drop into water or other liquid.
• If an appliance falls into water, “unplug it” immediately.
Do not reach into the water.
WARNING – TO REDUCE THE RISK OF BURNS,
ELECTROCUTION, and FIRE, OR INJURY TO PERSONS.
• An appliance should never be left unattended when
plugged in to a power outlet.
• When an appliance is used in a bathroom, unplug it
after use since the proximity of water presents a hazard
even when the appliance is switched off.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
• Children should be supervised to ensure they do not
play with the appliance.
• Use this appliance only for its intended use as described
in this manual. Do not use attachments not
recommended by Remington
• Never operate this appliance if it has a damaged cord
or plug, if it is not working correctly, if it has been
dropped or damaged, or dropped into water. If the
supply cord or plug of this styler is damaged it must
only be replaced by a qualified electrical tradesperson.
• Keep the cord away from heated surfaces.
• Do not use on people who are sleeping.
• Never drop or insert any object into any opening of this
appliance.
• Do not use outdoors or where aerosol (spray) products
are being used or where oxygen is being administered.
• The plates will be very hot during use. Do not let bare
skin touch heated surfaces.
• Do not place the heated styler on any soft surface such
as a bed, carpet or a towel. Place only on a hard, flat,
heat resistant surface.
saVe tHese instUctiOns
3
2
Key Parts
1. Heat sensor strip
2. Floating plate
3. Heat sensor on/off button
4. + Temperature increase button
5. – Temperature decrease button
6. Heat sensor on indicator
7. On/off switch setting
8. Digital temperature indicator
9. Hinge lock
10. Salon swivel cord
Heat sensOr actiVatiOn
Once the styler is switched on you can select the heat sensor option to protect
your hair’s condition. To activate, press the heat sensor button. The heat
sensor on indicator will illuminate and pulse while continually monitoring the
level of moisture in the hair. This is an optional function and can be turned off
by pressing the heat sensor button. When the heat sensor is not activated, the
heat sensor icon will not illuminate.
tUrBO BOOst fUnctiOn
This styler features a turbo function which will automatically select the highest
temperature of 230ºC. To operate the turbo boost function, press and hold the
‘+’ temperature increase button for 2 seconds.
teMPeratUre LOcK
This styler has a temperature lock to prevent the selected temperature from
being accidentally altered during use. When the selected temperature has
been reached, simply press and hold the – temperature decrease button for 2
seconds. This will lock the current heat setting and a lock icon will be seen in
the top of the straightener, below the temperature settings.
To unlock the temperature lock, simply press and hold the ‘–‘ temperature
button for 2 seconds.
aUtO Off safety featUre
If the styler is not used for a period of 60 minutes (temperature is constant) it
will automatically shut off.
styLing yOUr Hair
• Ensure your hair is completely dry.
• To make styling easier, part the hair either in the middle or to the side and
use clips to section your hair, top, sides and back.
• You may need to comb through your hair before straightening to ensure
that it is tangle free.
• Start at the nape of the neck and straighten the underneath sections of
hair first. When the underneath sections of hair are complete, move to the
next layers, finishing with the hair around the part line.
• Take about a 5 cm section of hair and pull taut and down and away from
the scalp. Holding the styler with the other hand, start at the roots and
clamp the hair firmly between the plates.
4
5
7
8
6
10
9
1
2
3
