9
Cleaning and Maintenance
Clean your Groomer
Regularly
Clean your groomer regularly to ensure your
unit’s operating life is not prematurely
shortened.
Cleaning attachments with water
■
Remove attachments.
■
Rinse attachments
under warm run-
ning water. Do NOT
use hot water,
which may cause
damage to compo-
nents.
■
You can use a hair
dryer on a cool or
medium heat set-
ting to help dry off
the attachments, if
desired.
!
Do not use harsh or corrosive cleaners on
the unit or its cutters.
!
Do not apply pressure or hard objects to
cutters.
Cleaning with brush
Thoroughly brush and blow out hair clip-
pings from cutter, bottom of attachments,
and top of power handle.
8
PG-150: Lubricating blades
Lubricate your PG-150’s grooming and
nose/ear attachments once a month to
ensure optimum performance.
■
Apply 1-2 drops of blade oil to the
attachments’ cutter blades.
■
Spread it lightly over the cutters with
your fingertip.
■
Wipe away any excess oil from the
cutters or the groomer.
Troubleshooting
? If the cutters do not move
The cutting unit may be dirty and clogged.
Clean and lubricate the unit as described
above.
? If the groomer doesn’t work when
turned on
PG-150: One or both of the batteries may
simply be inserted upside down. The
groomer will not function if the batteries
are positioned incorrectly. Open the battery
compartment as instructed on page 6, and
see if the batteries need to be turned
around.
CS27553_PG150_IB 8/31/05 5:12 PM Page 8
