GETTING STARTED - INSERTING THE BATTERY
1.
Make sure the trimmer is “OFF” and remove the protective cap.
2.
Hold the upper part of the unit and gently slide the lower part off.
(Figure A)
3.
Insert one “AAA” ALKALINE battery positive end down. (Figure B)
4.
Slide bottom part back onto the unit, making sure the notch slides
over the ON/OFF switch. (Figure C)
BATTERY CAUTIONS:
s 5SEOFNONALKALINEBATTERIESWILLIMPAIRTHEUNITSOPERATING
performance.
s "ATTERIESSHOULDNOTBELEFTINTHEUNITIFTHEUNITISNOTINUSEFOR
long periods.
s 4OPREVENTBATTERYCORROSIONTHEUNITSHOULDBESTOREDINADRY
environment.
s $EADBATTERIESSHOULDBEREMOVEDIMMEDIATELYANDDISPOSEDOF
properly.
s $ONOTUSERECHARGEABLEBATTERIESWITHTHISPRODUCT4HELOWER
voltage in rechargeable batteries impairs the performance of the
cutting unit.
