4
ABOUT YOUR GROOMER
MB6125AU SPECIFICATIONS
Power System
Cordless
Initial Charge Time
16 Hours
Full Charge Time
4 Hours
Run Time
60 Minutes
Indicators
LED Charging Indicator
Voltage Type (adaptor voltage type)
Single 220-240V only
AFTER EACH USE
We recommend that you clean your groomer after each use.
• Brush any accumulated hairs from the groomer and attachment heads.
• The easiest and most hygienic way to clean the groomer is by detaching the head
from the groomer body and rinsing the head with warm water.
• The groomer body should not be rinsed.
• Place one or two drops of cutter oil or sewing machine oil on the blades.
• Turn the groomer on to distribute the oil evenly, wipe off any excess oil.
ATTACHING THE GROOMING ATTACHMENTS
• To attach, place the desired trimming head on top of the groomer and rotate
clockwise to lock into place.
• To remove rotate the trimmer head anti-clockwise until it unlocks and then lift off
the groomer.
• To attach the adjustable comb to the 30mm trimmer head, line the comb rails up
with the trimmer head and slide onto the groomer until firmly secured.
BEFORE YOU BEGIN
• Comb facial hair with a fine comb before you start trimming.
• Hair should be dry and without any waxes or lotions before using the groomer.
TO THIN AND TAPER THE BEARD/MOUSTACHE
• Attach the wide trimmer blade.
• Place either the adjustable comb or a fixed comb on the trimmer blade, select the
desired length and switch on.
• Start trimming under the chin, following the jawbone line. Work towards the ear
and upper beard line using an upward motion.
TO TRIM EDGE OF BEARD OR MOUSTACHE
• Attach the wide trimmer blade.
• Hold the groomer with the cutting blade facing you, perpendicular to your skin.