background image

23

STEP 6:
TREAT YOUR SKIN

Select the correct energy level 
determined by the Skin Patch Test. Firmly 
press the Flash Window to the skin, 
making sure the skin is spread evenly and 
smoothly. Make sure the Flash Window is 
in full contact with the skin.
If the Flash Window is not in full  
contact with the skin, when you press  
the Flash Button, the device will make 
a beep-beep sound and no flash will 
be delivered.

When the Flash Window is in full contact 
with the skin, the Flash Button will blink 
orange indicating the device is ready to use.

Press the Flash Button. The device will 
flash a pulse of light onto your skin. You 
will see a flash of light and simultaneously 
hear a sound. You may feel a mild 
sensation of warmth and tingling.
Immediately after a flash is delivered, 
move the Flash Window to a new 
treatment location. In a few seconds, 
the Flash Button will blink orange again 

to indicate the device is ready to flash. 
Continue flashing the treatment area by 
moving the Flash Window in a grid pattern to 
ensure you cover the entire treatment area.

Note:

 For faster coverage, hold down the 

Flash Button while you lift the Hand Piece 
and place it back in contact with a new 
area to be treated. This will cause the unit 
to deliver a flash to the skin as soon as the 
flash interval has passed.

Содержание iLIGHT Elite IPL7000









































Отзывы: