3 Press the Flash Button to deliver a flash.
• Mild to moderate discomfort is normal. If a flash delivered at Energy Level 1 feels tolerable, increase to
Energy Level 2. Move the device to a different spot and flash the i-LIGHT® one more time. Repeat this
process until you find the setting that feels right for you.
• Wait 24 hours and then look at the test area. If the skin appears normal, proceed with your first full
treatment at the energy level you determined is right for you.
,
NOTE: You must test the device on each area of the face or body you wish to treat.
TREATMENT
,
CHANGING ATTACHMENTS
•
Your i-LIGHT® comes with two separate attachments for the face and body.
• The Body Attachment is specially designed for body hair and can flash every 3 seconds.
• The Facial Attachment is specially tuned for Female Facial Hair and minimises light leakage, it can flash
every 4 seconds.
• The attachments are marked with different icons to identify them (Fig. 8)
,
To change attachments:
,
WARNING: Always ensure the unit is OFF and the power cord is disconnected before removing the
attachment.
• If the attachment is removed while the unit is powered ON, all indicator lights on the base unit will
flash and audible “beeps” will sound.
• Allow the system to cool down for 5 minutes before attempting to change attachments.
1 Turn the Power Switch OFF and unplug the Power Cord from the electrical outlet.
2 Hold the attachment with one hand while pressing both Attachment Release Buttons with the other
hand and pull gently (Fig. 9).
3 Gently push the other attachment back into the Hand Piece making sure both side tabs click into
place.
,
NOTE: the longer tab (with gold circuits) must be on top to properly fit.
Fig. 8
Fig. 7
• Store the unused attachment in a safe location (such as in the packaging) taking care not to damage
the Flash Window and other components.
• The i-LIGHT® is equipped with two operating modes: Single Flash Mode and Multi-Flash Mode.
Your i-LIGHT® device will automatically be set to Single Flash Mode each time the device is powered ON.
• Single Flash Mode: The i-LIGHT® will
each
time
the
Flash Button is pressed. This mode is ideal for
precision treatments of the face and small areas.
• Multi-Flash Mode: The i-LIGHT® device will
when the Flash Button is pressed and will continue to
,
How to treat:
•
,
NOTE: When the Skin Contact Sensors are fully engaged you will hear a ‘chirp’ and the Bulb Status
Indicator Display will illuminate green.
2
3 Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
• For Single-Flash Mode, press the Flash Button each time you move to the next area.
• For Multi-Flash Mode, keep your
on the Flash Button to keep it depressed and glide to the next
automatically after 3 seconds.
,
NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact, simply resume
treatment by repeating the above steps.
,
Facial Treatment (female use only)
•
sensitive and more likely to be exposed to the sun’s UV rays; therefore treating
unwanted facial hair is
to treating the body – please be sure to read
the
Warnings and Safety Precautions carefully before beginning a facial treatment.
,
IMPORTANT: The Facial Attachment has been specially designed to treat the unique
characteristics of female facial hair. DO NOT use the Body Attachment on the face.
See section ‘Changing Attachments’ for more information.
Fig. 9
Fig. 10
14
Содержание i-LIGHT PRO+ Face & Body IPL6500AU
Страница 1: ...2 YEAR WARRANTY IPL6500AU...
Страница 2: ......
Страница 5: ...i LIGHT KEY FEATURES Figure1 20 19 1 18 10 11 17 12 13 14 2 3 4 4 5 6 7 8 9 16 12 15 14 4 13 13 5...
Страница 23: ......