8
Step 5 - The Finishing Touches
1.
Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2.
To produce a clean straight line at the sideburns, reverse the hair
clipper. Place the reversed hair clipper at right angles to the head, tips
of the blades lightly touching the skin and then work downwards.
CLEANING & MAINTENANCE
To ensure long lasting performance of your hair clipper, clean the blades
and unit regularly.
Note: Ensure that the hair clipper is turned off and unplugged when
cleaning.
After Each Use
1.
Ensure the hair clipper is switched off and disconnected from the
mains household power outlet.
2.
Brush the accumulated hair from the blades. Do not submerge the hair
clipper in water.
3.
To clean the body of the unit, wipe with a damp cloth and dry
immediately.
4.
Gently brush the remaining hairs away from the hair clipper comb and
hair clipper blade. Do not rinse the cutter assembly under water.
Every Six Months
At regular intervals the blade set should be removed and cleaned.
1.
Ensure that the hair clipper is empty of power, is switched off and
disconnected from the mains household power outlet.
2.
Remove the comb attachment.
3.
Hold the hair clipper in one hand so that the blades are at the top, and
the front of the hair clipper is facing you.
4.
Place your thumb of the opposite hand underneath the blades at the
front of the unit, hold the back of the blade set with your fore finger
and middle finger and firmly press upwards with your thumb. The
blade set will detach from the hair clipper.
5.
Brush the accumulated hair from the hair pocket and blades.
