Trim
TO TRIM
1.
Pull trimmer release button to
engage trimmer. (Diagram F)
2.
Hold the trimmer at a right angle
to your skin.
3.
Trim long, difficult hairs and side burns.
(Diagram G)
4.
Close trimmer by pressing down.
(Diagram H)
MAInTEnAn
CE
Cleaning & Care
NOTE: **When cleaning your shaver, make sure the shaver
is turned off and disconnected from the power cord.**
CAUTION
!
Cleaning your shaver
To ensure long lasting performance, it is important to clean
your shaver regularly. We recommend you clean your
shaver after each use. The easiest and most hygienic way to
clean the shaver is by rinsing the shaver head after use with
warm water.
Weekly
Clean under the cutter assembly at least once a week:
1. Turn the shaver off.
2. Remove the head assembly from the shaver body (Diagram I).
4.
Use your free hand to stretch your skin
so that the hairs stand upright. This
encourages your facial hair to stand out,
making it easier for them to enter the foil
and engage the intercept trimmer
(Diagram D).
5.
Hold the shaver so that the foils touch
your skin simultaneously. The
independently floating screens
automatically adjust to the contours of
your face. Only apply light pressure on
the shaving head while shaving and use
short, circular strokes (Diagram E).
6.
After shaving, turn the shaver off by
sliding the power button.
Shaving Tips
For A Better Shave
For a smoother, more comfortable, moisture-free shave, use a
Remington® Pre-Shave Powder Stick (SP5).
**Remington recommends that you use your new shaver
daily for up to three weeks to allow time for your hair and
skin to become accustomed to the new shaving system**
• Ensure your skin is dry and free of oils.
• Wait at least 15 minutes after getting up before shaving,
to ensure your face is free of puffiness that may be
present from sleeping.
• Always hold the shaver at a right angle to the skin so that
both heads are touching the skin with equal pressure.
• Stretch skin with the free hand so hairs stand upright,
making it easier for them to enter the cutting chamber.
• Shave with short, circular strokes. The use of short, circular
motions in stubborn areas may obtain a closer shave,
especially along the neck and chin line.
• Do not press hard against the skin in order to avoid
damage to foil heads.
kEY PARTS
SPECIFICATIONS
F3700AU
Power System
Cordless (Rechargeable)
Initial Charge Time
24 hrs
Full Charge Time
16 hrs
Cordless Shave Time
40 min
Indicators
Charging
Voltage Type
Single Voltage
Replacement Part No.
SP-62A
Power System:
Cordless – shaver can only be used without the power cord.
Indicators:
Charging – green light that glows when the shaver is being
charged.
Voltage Type:
Single Voltage – shaver can only be used with an outlet
voltage of 220-240V.
HOW TO USE
Adjusting To Your Shaver
As with every shaver, your shave will improve over time. Allow
up to four weeks of daily shaving to develop an effective
shaving style and for your skin to adjust to the new shaver. The
adaptation period may take a little longer if your skin is
sensitive, if you are switching from a different method of
shaving, or if you alternate between shaving methods.
Removing The Protective Head Guard
Before operating your shaver, remove the protective head
guard, which protects the foils and cutter assembly. It is
important to remove it correctly to avoid damaging the clips
that hold it to the shaver.
1.
Press lightly on the top of the protective head guard.
2.
Lift the lower rear edge.
F3700AU Tools of the Trade Foil Shaver
USE & CARE InSTRUCTIOn MAnUAL
Thank you for purchasing your new Remington® Tools of the
Trade Foil Shaver. Inside this manual you will find tips on using
and caring for your shaver.
1. Foils
2. Cutter assembly
3. Head release button
4. Hair pocket
5. Pop up trimmer (rear)
6. On/Off switch
7. Charging indicator
8. Power Port
Also includes:
Cleaning brush
Power adaptor
1
2
8
6
3
7
5
4
2
3
4
5
6
3.
Pull the protective head guard away from the shaver. When the
shaver is not in use, always keep the protective head guard on
the shaver head and keep the trimmer in the OFF position.
Charging
Before using, read the important safety instructions in
this manual.
1.
Ensure the product is switched off.
Connect the shaver to the adapter
(Diagram A).
2.
Connect to the mains (Diagram B) and
charge for at least 24 hours when using
for the first time (Diagram C). This first
charge is important to the shaver’s
battery life.
3.
When plugged, the charging indicator will
light up.
4.
When empty, the battery should be
charged for 16 hours, and will provide
40 minutes of shaving time.
5.
To preserve the life of the batteries, allow
them to fully discharge every six months,
and then recharge them for 24 hours.
CAUTIOn!
•
Make sure the shaver and your hands are dry when charging
the shaver.
•
Always charge the shaver in a cool, dry place.
SHAVInG
To Shave
1.
Remove power adaptor from the shaver (Diagram A).
2.
Slide the power button to activate the shaver for shaving.
3.
Pull the trimmer release button to engage the trimmer, and use
it to remove long hair first. Then push trimmer downward to
lock it in when finished.
IMPORTAnT SAFETY InSTRUCTIOnS
When using an electric shaver, basic safety precautions should
always be observed, including the following.
Read all instructions before using this shaver.
KEEP POWER ADAPTOR AWAY FROM WATER
WARNING – TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC
SHOCK OR INJURY TO PERSONS:
• The shaver should never be left unattended when plugged
into a power outlet, except when charging the shaver.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
• Use this shaver only for its intended use as described in this
manual. Do not use attachments not recommended by
Remington.
• Never operate this shaver if it has a damaged cord or plug, if
it is not working correctly, if it has been dropped or damaged,
or dropped into water. If the supply cord or plug of this shaver
is damaged it must be replaced. It cannot be repaired.
• Keep the cord away from heated surfaces.
• Charge, use and store the product at a temperature between
0°C and 32°C.
• Never insert any object into any opening of this shaver.
• Do not use outdoors or where aerosol (spray) products are
being used, or where oxygen is being administered.
• Do not use the shaver with a damaged or broken tracks or
cutters, as injury may occur.
• For use on facial hair only. Not intended for shaving the hair
on your head.
• Do not plug or unplug the shaver with wet hands.
• For household use only.
Remington strongly recommends that an approved Safety Switch
(residual current device) be installed to protect all bathroom
power outlets. Ask an electrical contractor for advice
.
SAVE THESE InSTRUCTIOnS
7
8
F3700AU_IFU_FA_170712.indd 8-14
17/07/12 11:42 AM
