6
STORAGE, CLEANING AND MAINTENANCE
Let the appliance cool down before cleaning and storing away
•
To maintain peak product performance and to prolong motor life, it is
important to regularly remove any dust and dirt from the inlet grille.
•
Remove the grille, clean with a cloth or soft brush, then replace it.
•
To replace the rear grille, insert the rear grille piece into the back of
the dryer and turn clockwise to click into place.
OVERHEAT PROTECTION
In the event of overheating, the appliance may either stop unexpectedly
or start to blow cold air. Overheating is usually caused by a blocked grille/
filter. If this happens, immediately unplug the appliance and refer to
STORAGE, CLEANING AND MAINTENANCE to clean the grille/filter. If, after
doing this overheating continues to happen, stop using the appliance and
contact Customer Service.
