4
• Do not allow any part of the appliance touch the face, neck or scalp.
• During use, always ensure the inlet and outlet grilles are not blocked in any way as
this will cause the unit to automatically stop. If this should occur, switch off and allow
the unit to cool.
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. Speed/heat setting switch
2. Cool shot
3. Concentrator attachment
4. Inlet grille
5. Hang up loop
INSTRUCTIONS FOR USE
1. Wash and condition your hair as normal.
2. Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
• Fit the concentrator attachment to the front of the hairdryer. Take care when you do
this because the concentrator can become hot during use.
3. Plug the product into the mains power supply.
4. Select the desired temperature and speed setting using the switch on the handle.
5. After use, turn the appliance off and unplug it.
OVERHEAT PROTECTION
In the event of overheating, the appliance may either stop unexpectedly or start to blow
cold air. Overheating is usually caused by a blocked grille/filter. If this happens,
immediately unplug the appliance and refer to STORAGE, CLEANING AND MAINTENANCE
to clean the grille/filter. If, after doing this overheating continues to happen, stop using
the appliance and contact Customer Service.
Содержание D2121
Страница 2: ...2 e i g f j ...